• Usb Wifi Receiver For Pc
• Usb Satellite Receiver For Laptop
• Usb Satellite Receiver Patch Downloads

A Firmware Update is available for the AVR-S510BT receiver. This update enhances the unit's performance and corrects bugs for Poor quality image when connected to some products via HDMI.

To update your AV receiver, Click here to visit our 'Product Update/Upgrade' page and follow these steps:

1. Make sure the AVR is in Standby.

2. Once the firmware update (From the dropbox link) is saved on your PC's hard-drive, unzip the folder until you see the files: 'S510BT_USB_V00_33.fw' and 'MCS_ANAM_S510BT_148.MCS'.

3. Using a FAT 16 or FAT 32 formatted USB drive plugged to your PC's USB port, move the 'S510BT_USB_V00_33.fw' and 'MCS_ANAM_S510BT_148.MCS' files onto the USB drive.

4. Once the firmware files are successfully saved onto the USB drive, remove the USB drive from your PC's USB port and place it into the AVR's front USB port.

5. Press the 'Setup' button on the AVR-S510BT's remote control to display the Setup menu. Select General > Firmware > Start.

6. Press the 'Enter' button on the AVR's remote control to select 'Yes'.

   Note:'Checking Update File' will appear on the unit's display. The Update will start downloading and when finished, it will display 'Update Complete' on the unit's display.

7. Remove the USB drive from the AVR's USB port and power cycle the receiver using the Power/Standby button. The receiver is now ready for use.

Procedure to Check the Firmware Version

1. Set the AVR-S510BT to Standby. Please make sure the Zones are powered off.

2. Press and hold 'Preset + and Tune-' on the front panel.

3. While holding the 'Preset + and Tune-' buttons, power On the AVR-S510BT and allow 5 seconds for initialization.

4. Release the 'Preset + and Tune-' buttons and then press the 'Status' button on the front panel.

The GlobalSat BU-353 is a high performance USB GPS receiver that easily connects to The CAPN. GlobalSat BU-353 S4 USB GPS Receiver - SiRF Star IV(WAAS Enabled) Price: $79.95 - Windows 7, 8. Built-in SuperCap to reserve system data for rapid satellite acquisition. Built-in patch antenna. Super-cohesive magnetic for mounting on the car. The satellite receiver has a channel memory of 15,000 channels therefore you will never run out of space to store your TV & Radio channels. Fast software download & channel List upload/download via USB 2.0. Home Satellite TV How to Upgrade Strong Decoder Software with a usb flash drive & frequently asked questions on. It is a standard, agreed to by manufacturers of satellite receivers, to interface a digital receiver to a Conditional Access Module (CAM), where the purpose of the CAM is to decipher encrypted signals. Is too high for the. Step 1: Insert the Qi wireless receiver patch connector into iPhone's Lightning port Step 2: Attach the Qi wireless receiver patch onto the back of iPhone Step 3: Optional - install iPhone with.

This website is all about satellite receiver softwares, a free resource where you can download softwares to update your satellite receiver or discuss your problems in the discussion forum. You can even subscribe for your satellite receiver and whenever we have an updated software, you will receive a notification email about the updates.

Note: You will see each firmware version displayed on the AVR's510BT's display. Pressing 'STATUS' multiple times will provide each firmware version.

Usb Wifi Receiver For Pc

See the Firmware Version Chart below to match the current firmware versions.

Usb Satellite Receiver For Laptop

Several times a day, a NOAA weather satellite passes over your head, beaming down pictures of weather systems and cloud formations. These transmissions aren’t encrypted, and given the requisite hardware it’s possible for you to download these images from space as [Lovro] shows us in a tutorial video.

To get these near real-time satellite pictures, [Lovro] used one of those USB TV tuners we’ve grown so fond of. A somewhat specialized antenna is required to receive the right hand polarized transmissions from NOAA weather satellites, but with a few bits of wood and wire, [Lovro] made a helical antenna to listen in on the weather satellites transmitting around 137 MHz. After gathering a whole bunch of data from the satellites with SDRsharp, [Lovro] used an image decoder to turn an audio file into a picture taken from space just hours ago.

Usb Satellite Receiver Patch Downloads

This isn’t the first time we’ve seen images from a NOAA weather satellite downloaded with a software defined radio; last year [hpux735] did just that with a somewhat inexpensive Softrock SDR. [Lovro]’s use of a USB TV tuner to receive the transmission from NOAA satellites is a lot easier on the pocketbook, though, with the largest expense being an investment in time to build a helical antenna.